首页 资讯 法规 行业 标准 展会 探伤 硬度 仪器 声发射 磁粉 粗糙 视频

如何进行双涂层测量

来源: 作者:中国无损检测 人气: 发布时间:2024-03-29
摘要:双涂层测量 对电解或微热浸镀锌涂层的金属板材进行双涂层测量。 Determining the single coating thicknesses at the duplex measurement using the phase sensitive eddy current and the magnetic induction test methods. 功能原理 同时采用磁感应测试方
涂层测量
电解或微热浸镀锌涂层的金属板材进行双涂层测量。
 
Determining the single coating thicknesses at the duplex measurement using the phase sensitive eddy current and the magnetic induction test methods.
功能原理
同时采用磁感应测试方法和相位敏感电涡流测试方法测量具有较薄的锌涂层(典型厚度介于 5 和 20 μm 之间,分别对应于 0.2 至 0.79 密耳)的双层涂层。同时使用这两种测试方法时,只需一个测量步骤,即可通过两个测量读数分别计算和显示油漆和锌涂层的厚度。对于无显著锌-铁扩散区的热浸锌双涂层产品,同样可使用这些测试方法测量。
钢管探伤仪http://www.gangguantanshangyi.com                    超声波检测仪http://www.chaoshengbojianceyi.com
铸件探伤仪http://www.zhujiantanshangyi.com                         容器探伤仪http://www.rongqitanshangyi.com
便携式硬度计http://www.bianxieshiyingduji.com                      便携式硬度计http://www.bianxieshiyingduji.cn
责任编辑:中国无损检测 转载请注明出处 www.wusunjiance.net
首页 | 关于我们 | 联系我们 | 发展历程 | 网站声明 | 合作洽谈 | 常见问题 | 广告报价 | 服务协议

Copyright © 2010-2017 无损检测网 版权所有 备案号:冀ICP备10013405号-141